Storage & Moving calculator
What Stretch Wrap Roll Size Do I Need?
Find minimum stretch-wrap film length from perimeter around wrapped load, height of wrapped load, and stretch-film width.
Enter your measurements
What Stretch Wrap Roll Size Do I Need? Measure perimeter around wrapped load, height of wrapped load, and stretch-film width first. This tool converts them into minimum stretch-wrap film length so the recommendation stays tied to your actual dimensions or specification.
- Perimeter around wrapped load — Required
- Height of wrapped load — Required
- Stretch-film width — Required
- Horizontal wrap passes per level — Required
- Vertical overlap fraction — Required
Minimum stretch-wrap film length
Enter the measurements above to calculate minimum stretch-wrap film length.
How the calculation works
The engine follows this rule: verticalPitch=filmWidth×(1-overlapFraction); verticalLevels=ceil(wrapHeight/verticalPitch); filmLength=loadPerimeter×verticalLevels×wrapPasses. It returns minimum stretch-wrap film length from the configured inputs.
Worked example
Example: Perimeter around wrapped load = 50 cm; Height of wrapped load = 100 cm; Stretch-film width = 60 cm; Horizontal wrap passes per level = 2; Vertical overlap fraction = 50%. Result: Film Length = 400 cm; Vertical Levels = 4; Vertical Pitch = 0.3.
Before you decide
Measure the actual item, opening or body dimension involved. This page calculates the stated geometry or quantity only; product-specific construction or installation details can still affect the final choice. For what stretch wrap roll size do i need, the limiting result on this page is minimum stretch-wrap film length.
Direct measurement/geometry calculation. No external reference is required for the arithmetic itself; the result is derived only from the user-entered measurements and the formula stored in calculationLogicJson.
Frequently asked questions
How does the Stretch Wrap Roll Size | Size Guide calculator work?
It uses verticalPitch=filmWidth×(1-overlapFraction); verticalLevels=ceil(wrapHeight/verticalPitch); filmLength=loadPerimeter×verticalLevels×wrapPasses. The result is minimum stretch-wrap film length.
Which measurements or specifications do I need?
Use these inputs: Perimeter around wrapped load, Height of wrapped load, Stretch-film width, Horizontal wrap passes per level, Vertical overlap fraction. Measure or copy the values from the exact product/specification rather than guessing.
Is the result a guarantee that the product will fit or be suitable?
No. The calculator answers the stated minimum stretch-wrap film length question. Manufacturer instructions, safety rules, certification, installation tolerances or brand-specific size charts can impose additional requirements.